Azden 35HT Bedienerhandbuch Seite 3

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 12
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 2
3
3
330UPR Dual-Channel Receiver
After installing new batteries, mount the receiver to your video camera with supplied
shoe mount or hook & loop fastener. Select one of the supplied cables and connect the
output on the receiver and input on the video camera. Turn the power switch for Ch. 1
and/or Ch. 2 to “ON” and the battery level indicator on the LCD display should come on.
If not, check the batteries. When the 330UPR receives a signal from the transmitter,
the reception level indicator will come on. If it does not, make sure both the receiver
and the transmitter are on matching channels.
35BT Body-Pack Transmitter
Plug in the supplied EX-503L Lavalier Microphone and clip it to your subject. The micro-
phones should be placed 4”-12” from the subjects mouth. Clip the transmitter to a
belt by using the supplied belt clip or place it in a pocket. Turn the power switch to
“ON” and the battery level indicator on the LCD display should come on. If not, check
the battery. Have someone speak into the microphone as you monitor the sound
through the 330UPR Receivers phone output. If the sound is distorted, lower the MIC
input level on the 35BT Transmitter. If there is not enough volume, raise the MIC input
level on the Transmitter.
35XT Plug-in Transmitter
Attach the 35XT Transmitter to any low impedance microphone with a corresponding 3-
pin XLR connector. Turn the power switch on the 35XT Transmitter to “ON” position
and the battery level indicator on the LCD display should come on. Have someone
speak into the microphone as you monitor the sound through the camera’s monitor
output. If the sound is distorted, lower the MIC input level control on the 35XT Trans-
mitter. If there is not enough volume, raise the level control on the Transmitter.
35HT Handheld Microphone/Transmitter
Turn the power switch on the 35HT Transmitter to “ON” position and the battery level
indicator on the LCD display should come on. Have someone speak into the micro-
phone as you monitor the sound through the camera’s monitor output. Adjust the MIC
input level control accordingly.
Seitenansicht 2
1 2 3 4 5 6 7 8 ... 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare